Previous  Top  Next

Windows Time Client

DHCP Options 41-80

The table below shows the option numbers used to configure PresenTense Time Client and their corresponding effect.

Option

Values

Registry Key

Notes

Interface Link

41

Not in use

Not in use

Not in use

N/A

42

0 = False 1 = True

LoadTrayIcon

Choose whether to load the tray icon.

Settings

43

0 = False 1 = True

bDHCPEnable

Enable or disable DHCP configuration

Advanced Settings

46

1. Version 4  2. Version 3

ntp4plugin-version

NTP version of the server

NTP4 Plugin

47

Valid IP address or FQDN

ntp4plugin-primary-server

Primary NTP server for synchronization

NTP4 Plugin

48

Valid IP address or FQDN

ntp4plugin-redundant-server

Secondary NTP server for synchronization

NTP4 Plugin

49

Valid IP address or FQDN

ntp4plugin-redundant2-server

Third NTP server for synchronization

NTP4 Plugin

50

1. 16 seconds 2. 32 seconds 3. 1 minute 4. 2 minutes, (4 min , 8 min, 17 min, 34min ), 9. 1.1 hours, 10. 2.2 hrs, (4.5, 9.1, 18.2 hrs)

ntp4plugin-minpoll

Minimum polling period for synchronization to reference time source. 1. is 16 seconds through to 13 which represents 18.2 hrs.

NTP4 Plugin

51

1. not used 2. 32 seconds 3. 1 minute 4. 2 minutes, (4 min , 8 min, 17 min, 34min ), 9. 1.1 hours, 10. 2.2 hrs, (4.5, 9.1, 18.2 hrs)

ntp4plugin-maxpoll

Maximum polling period for synchronization to reference time source. 2. is 32 seconds through to 13 which represents 18.2 hrs.

NTP4 Plugin

52

0 = False 1 = True

ntp4plugin-boolburst

Burst mode for NTP polling

NTP4 Plugin

56

Path to config file

ntp4plugin-config

Should normally be as follows. Note: Observe the double \\ in the path.
C:\\Program Files\\PresenTense\\ntp.conf


57

Valid port number

ntp4plugin-ntpport

Normally 123

NTP4 Plugin

58

Number between 1 and 99

ntp4plugin-key1

Corresponds to Key number from NTP.KEYS file

NTP4 Plugin

59

Number between 1 and 99

ntp4plugin-key2

Corresponds to Key number from NTP.KEYS file

NTP4 Plugin

60

Number between 1 and 99

ntp4plugin-key3

Corresponds to Key number from NTP.KEYS file

NTP4 Plugin

70

0 = False 1 = True

bNoDefaultSrv

If false, no default NTP server is used.

Advanced Settings

71

0 = False 1 = True

bDisableW32Time

Disable Win32Time/Windows Time

Advanced Settings

72

0 = False 1 = True

bW32TimeAutoDetect

Auto detect of clusters and AD/DC servers

Advanced Settings

73

0 = False 1 = True

bW32TimeNoSync

Manual setting of the NoSync W32Time flag

Advanced Settings

74

0 = False 1 = True

bW32DisableClient

Manual setting to disable Win32Time NTP client

Advanced Settings

75


iNtpAltPort

Alternate NTP port for PresenTense Time Client. Default is 6011.

Advanced Settings

76

0 = False 1 = True

bUseAltPort

Forces use of  the alternate NTP port set above.

Advanced Settings